-
1 × 2.061,00 €
-
1 × 943,00 €
-
1 × 372,50 €
-
1 × 144,00 €
-
1 × 381,00 €
-
1 × 5.880,00 €
-
1 × 3.823,01 €
-
1 × 625,00 €
-
1 × 1.488,00 €
-
1 × 567,00 €
-
1 × 4.035,00 €
-
1 × 32.711,00 €
-
1 × 381,00 €
-
1 × 155,00 €
-
1 × 6.133,00 €
-
1 × 476,00 €
-
1 × 1.609,00 €
-
1 × 77,90 €
-
1 × 57,70 €
-
1 × 35,00 €
-
1 × 7.919,00 €
-
1 × 662,00 €
-
1 × 18.260,00 €
-
1 × 215,00 €
-
1 × 440,00 €
-
1 × 2.262,00 €
-
1 × 74,60 €
-
1 × 17.292,00 €
-
1 × 1.233,01 €
-
1 × 7.737,00 €
-
1 × 550,00 €
-
1 × 76,20 €
-
1 × 15.868,00 €
-
1 × 624,00 €
-
1 × 539,00 €
-
1 × 8.696,00 €
-
1 × 13.020,00 €
-
1 × 121,00 €
-
1 × 179,01 €
-
1 × 945,00 €
-
1 × 11,90 €
-
1 × 228,00 €
-
1 × 509,00 €
-
1 × 4.397,00 €
Roll over image to zoom in
Sleipner SPS66B Actuator kit for Vector Fins™ VF1050
Please fill the form with the required informations to send you an offer.
Order form
For VF1050 stabilizer fins. The height inside a boat is often a critical measurement when installing stabilizing systems in modern boats.
Sleipner's SPS66 actuators for Vector fins™ are up to 75 percent more compact than others, constructed for easy installation and minimal noise reproduction.
Silent and Reliable Construction
Technical design benefits
- Precision machining and assembly secures a long lifetime and durability.
- No additional center lock. This is automatic in the standard hydraulic system – very safe due to the hydraulics having extreme safety limits – actually stronger than the shaft.
- Dual cylinders provide a balanced load, unlike single-cylinder solutions and less bearing load, allowing for a more compact shaft bearing assembly.
- Purpose-designed dual shaft sealing - superior to standard Simmer Ring lip seals.
- Internal hydraulic connections on actuators are pre-fitted. The installer only fits non-moving hoses/pipes - Easier and safer.
- No complex adjustments are required to set up a controller with lots of factors. These are set automatically on the first sea-trial of the boat.
- Bearing the lifetime lubricated SKF high-load bearings transferring the cylinder forces to the fins, have a built-in tightening system. This means that when you on most brands often need to change all bearings to remove a small noise from minimal bearing wear, you can instead tighten them again and keep going—saving both cost and hassle to get the bearings changed.
- Vector fins are easily and quickly installed and removed from the outside for best convenience, such as transport or other haul-out situations.
- Defined shaft-shear point in cDefined shaft-shear point in case of the fins accidentally hitting something.
- All wet parts are made of stainless steel.
Size comparison
Size from side view compared to other brand actuators for similar fin size:Properties
ANY SPEED
The concave shape of the Vector Fins™ creates multilateral force direction improving the stationary positioning of a vessel while at anchor. The uniqueness of the design also becomes evident while underway as it improve in effectiveness as speed increases. Sea trials have proven that Vector Fins™ are up to 50% more efficient at anchor and capable of reducing the uncomfortable rolling motions of the vessel by up to 95% while cruising.360° INSTALLATION
Designed to fit in small and challenging installation areas, the Vector Fins™ unique cone shaft design allows you to utilize the space onboard to install the actuators in any direction and insert the fins into the position you require.S-LINK™
S-Link™ is a CAN-based control system used for communication between Sleipner products installed on a vessel.- Compact and waterproof plugs
- Keyed and color-coded connectors to ensure correct and easy installation
- Different cable lengths, extenders and T-connectors makes the system scalable and flexible to install
HYD
Powered by hydraulic pressure.Dimensions:
- (H) Height: 190mm / 7.5in
- (+H) Additional Height: 318mm / 12.5in
- (L) Length: 770mm / 30.3in
- (W) Width: 650mm / 25.6in
- (D) Diameter: 175mm / 6.8in
- (HT) Hull Thickness: 70mm / 2.8in
Operating Power | Hydraulic |
Power Requirement | Hydraulic Pressure |
Ideal Vessel Class | Commercial vessel, Motor boat |
Ideal Vessel Size | > 20m / > 70ft |
Weight | 105kg / 231.5lbs |