-
1 × 51,20 €
-
1 × 1.306,00 €
-
1 × 192,00 €
-
3 × 3.323,00 €
-
1 × 738,00 €
-
1 × 607,00 €
-
2 × 77,40 €
-
1 × 121,00 €
-
1 × 41,80 €
-
2 × 624,00 €
-
2 × 35,20 €
-
2 × 4.035,00 €
-
2 × 498,00 €
-
1 × 544,00 €
-
1 × 1.411,00 €
-
1 × 391,50 €
-
1 × 3.982,00 €
-
1 × 393,00 €
-
1 × 568,01 €
-
1 × 4.530,00 €
-
1 × 164,50 €
-
1 × 1.233,01 €
-
1 × 320,50 €
-
1 × 437,00 €
-
1 × 1.960,00 €
-
1 × 353,50 €
-
1 × 494,50 €
-
1 × 536,00 €
-
1 × 583,00 €
-
1 × 10,40 €
-
1 × 2.683,00 €
-
1 × 52,30 €
-
2 × 1.265,00 €
-
1 × 116,00 €
-
1 × 1.175,00 €
-
1 × 115,50 €
-
1 × 144,00 €
-
1 × 9,20 €
-
1 × 397,51 €
-
1 × 71,90 €
-
1 × 378,00 €
-
1 × 2.178,00 €
-
1 × 1.642,00 €
-
1 × 27,30 €
-
1 × 316,00 €
-
1 × 1.415,00 €
-
1 × 4.426,01 €
-
1 × 548,00 €
-
1 × 2.825,00 €
-
1 × 23,30 €
-
1 × 7.737,00 €
Roll over image to zoom in
Sleipner SPS66B Actuator kit for Vector Fins™ VF1050
Please fill the form with the required informations to send you an offer.
Order form
For VF1050 stabilizer fins. The height inside a boat is often a critical measurement when installing stabilizing systems in modern boats.
Sleipner's SPS66 actuators for Vector fins™ are up to 75 percent more compact than others, constructed for easy installation and minimal noise reproduction.
Silent and Reliable Construction
Technical design benefits
- Precision machining and assembly secures a long lifetime and durability.
- No additional center lock. This is automatic in the standard hydraulic system – very safe due to the hydraulics having extreme safety limits – actually stronger than the shaft.
- Dual cylinders provide a balanced load, unlike single-cylinder solutions and less bearing load, allowing for a more compact shaft bearing assembly.
- Purpose-designed dual shaft sealing - superior to standard Simmer Ring lip seals.
- Internal hydraulic connections on actuators are pre-fitted. The installer only fits non-moving hoses/pipes - Easier and safer.
- No complex adjustments are required to set up a controller with lots of factors. These are set automatically on the first sea-trial of the boat.
- Bearing the lifetime lubricated SKF high-load bearings transferring the cylinder forces to the fins, have a built-in tightening system. This means that when you on most brands often need to change all bearings to remove a small noise from minimal bearing wear, you can instead tighten them again and keep going—saving both cost and hassle to get the bearings changed.
- Vector fins are easily and quickly installed and removed from the outside for best convenience, such as transport or other haul-out situations.
- Defined shaft-shear point in cDefined shaft-shear point in case of the fins accidentally hitting something.
- All wet parts are made of stainless steel.
Size comparison
Size from side view compared to other brand actuators for similar fin size:Properties
ANY SPEED
The concave shape of the Vector Fins™ creates multilateral force direction improving the stationary positioning of a vessel while at anchor. The uniqueness of the design also becomes evident while underway as it improve in effectiveness as speed increases. Sea trials have proven that Vector Fins™ are up to 50% more efficient at anchor and capable of reducing the uncomfortable rolling motions of the vessel by up to 95% while cruising.360° INSTALLATION
Designed to fit in small and challenging installation areas, the Vector Fins™ unique cone shaft design allows you to utilize the space onboard to install the actuators in any direction and insert the fins into the position you require.S-LINK™
S-Link™ is a CAN-based control system used for communication between Sleipner products installed on a vessel.- Compact and waterproof plugs
- Keyed and color-coded connectors to ensure correct and easy installation
- Different cable lengths, extenders and T-connectors makes the system scalable and flexible to install
HYD
Powered by hydraulic pressure.Dimensions:
- (H) Height: 190mm / 7.5in
- (+H) Additional Height: 318mm / 12.5in
- (L) Length: 770mm / 30.3in
- (W) Width: 650mm / 25.6in
- (D) Diameter: 175mm / 6.8in
- (HT) Hull Thickness: 70mm / 2.8in
Operating Power | Hydraulic |
Power Requirement | Hydraulic Pressure |
Ideal Vessel Class | Commercial vessel, Motor boat |
Ideal Vessel Size | > 20m / > 70ft |
Weight | 105kg / 231.5lbs |