Roll over image to zoom in
Xantrex 815-3524-02 Freedom SW-3524, 230V AC/50Hz (24V DC)
True sine wave Inverter with 200% power surge for 5s to support motor loads.
1.512,90 €(VAT excl.)
1.876,00 €(24% VAT incl.)
True sine wave Inverter with 200% power surge for 5s to support motor loads. Generator support mode to supplement generator when AC loads exceed generator’s capacity. Stackable in parallel. Xanbus EnabledTM to work with Freedom SW Combox accessory to provide data logs and system control, accessible from your smartphone or tablet.
Premium sine wave performance and efficient, multi-stage charging
Just like its North American 110V AC counterpart, the NEW Freedom SW 230V AC inverter/charger offers premium sine wave performance and efficient, multi-stage charging. The 2x continuous power surge rating provides necessary start-up power for demanding applications including inductive motor loads. Available in two 230V AC/50Hz, 24V DC models, the Freedom SW offers PARALLEL stacking capability to enable twice-the-rated output. Both models can operate in tandem with a generator to temporarily assist power loads with large start-up demands such as air conditioners, water pumps etc. A Xanbus AGS must be installed in the system in order for this feature work. Both are compatible with optional accessories such as the System Control Panel (SCP) and the Automatic Generator Start (AGS).Designed for a variety of mobile 24V DC applications such as commercial, emergency and recreational vehicle, marine vessel, bus, construction and other heavy duty applications.
Features:
- True sine wave to support sensitive electronics
- 200% for 5s surge for motor loads
- Generator support mode
- Xanbus Enabled
- Parallel units to double inverter power
Electrical specifications – Inverter | |
| Output power (continuous at 40° C) | 3400W |
| Surge rating (5 seconds) | 6800W |
| Output frequency | 50 Hz +/- 0.2 Hz |
| Output voltage | 230 V |
| Output wave form | True sine wave |
| Optimal efficiency | 90% |
| No-load power draw (inverting) | <2.2A DC |
| Input DC voltage range | 20 – 32V DC |
| AC connections | Single phase in / out |
Electrical specifications – Battery charger | |
| Output current (continuous at 25° C) | 90A |
| Output voltage | 24V DC |
| Output voltage range | 12 – 32V DC |
| Charge control | 3 stage with manual equalize |
| Charge temperature compensation | Remote battery sensor (included) |
| Optmial Efficiency | > 85% |
| AC input power factor (maximum charge) | 0.98 typical |
| Input current (for maximum charging) | 14A rms nominal |
| Input AC voltage | 230 V |
| Input AC voltage range | 170-270V |
| Dead battery charge | > 12V DC |
General specifications | |
| Compatible battery types | LiFePO4 / Flooded / gel / AGM |
| Transfer relay rating | 2 legs at 30A each |
| Transfer time (AC to inverter and inverter to AC) | < 20ms |
| Optimal operating temperature range | – 20° C to 60° C: – 20° C |
| Charge temperature compensation | Remote battery sensor (included) |
| Storage ambient temperature range | – 40° C to 85° C |
| Part Number | 815-3524-02 |
| L x W x H | 197x343x387mm |
| Net Weight | 27.2kg |
Regulatory | |
| Safety | CE Marking, Low Voltage Directive Compliant (Marine installations, drip shield, 808-9004) |
| EMC | CE Marking, EMC Directive and Automotive EMC – Regulation 10 R E-Mark Compliant |
| Environmental | CE Marking, RoHS Directive Compliant |
