Sleipner SE80 Tunnel Thruster 12/24V (SE80/185T)

The SE80 provides 80-96 kg of thrust suitable for a wide range of boats between 10-15m.

2.043,00 2.145,00 

Clear
Κωδικός: SE80/185T
Μήκος σκάφους
10 - 15 m

Ετικέτες:

The SE80 provides 80-96 kg of thrust suitable for a wide range of boats between 10-15m. Utilizing the same mechanical parts as the even more powerful SE100 makes it an exceptional energy-efficient thruster, and thereby a very popular model.

It is fitted either in a tunnel through the boat's bow or into a stern tunnel at the boat's stern using a stern thruster kit (sold separately). Remote control is a popular accessory. See some of the significant product and safety features below.

FLEXIBLE INSTALLATION
Sleipner offers installation flexibility to work with the space you have. Our thruster models allow installation at any angle on the tunnel, tailored to fit any space available in your vessel.
POWER SUPPLY
Powered by direct current.
FLEXIBLE COUPLING
Flexible coupling protects the product’s driveline by compensating for misalignment between the shafts of the electric motor and gearleg.
ANALOG
Sleipner analog signal cables with Plug & Play connectors are color-coded to match the wiring diagrams with high-quality connectors to ensure a correct installation.
OVERHEAT PROTECTION
Automatic detection of overheating of internal components. When an unsafe temperature is detected, the unit is automatically shut off to prevent overheating.
GALVANIC SEPARATION
Immersed parts exposed to seawater are galvanic isolated from the onboard electrical system, eliminating stray currents.
SEALED DRIVE LUBRICATION
The thruster gearleg is pre-filled for lifetime lubrication and sealed using a long-time mechanical seal with ceramic and carbon surfaces for ultimate security against water intrusion.
TWIN PROPELLERS
Twin propellers can provide more thrust than a single propeller system in the same tunnel diameter. We use this system in our mid-range models, where high thrust is required in small tunnel diameters. Due to the compact design and high performance, the twin models have become the thrusters of choice among boatbuilders worldwide.
Q-PROP™
The Q-PROP™ has measured noise reductions of up to 75% in controlled environments. The five-bladed skew propeller reduces noise levels while maintaining exceptional efficiency. Some thruster models even see an increase in thrust power.
  • The expected noise reduction in average installations: 20-40%
  • Upgrade kits are available for most Sleipner thruster models with special adaptors
INTELLIGENT POWER CONTROL
Sleipner's patented intelligent power control provides a minimal delay between drive directions to reduce wear of the mechanical parts while monitoring solenoid functions. In the case of a solenoid lock-in, the thruster will automatically stop without extra user action or controlling the main switch.
Dimensions
  • (H) Height: 352mm / 13.86in
  • (L) Length: 206mm / 8.11in
  • (W) Width: 252mm / 9.92in
  • (ID) Internal Diameter: 185mm / 7.28in
  • (WD) Water Depth: 185mm / 7.28in
  • (TL) Recommended Tunnel Length: 216mm / 8.5in
  • (TL min.) Minimum Tunnel Length: 179mm / 7.05in
  • (T min.) Minimum Tunnel Wall Thickness: 6mm / 0.24in
  • (T max.) Maximum Tunnel Wall Thickness: 8mm / 0.31in
Stern dimensions
  • (L) Internal Length: 294mm / 11.6in
  • (+L) Tunnel Length: 265mm / 10.4in
  • ID: 185mm / 7.3in
  • (HT) Maximum Hull Thickness: 56mm / 2.2in
Operating PowerElectric
Power Requirement12V / 24V DC
Power Output4.4kW / 6hp
Thrust at 12V / 24V96kg (212lbs)
Thrust at 10.5V / 21V80kg (176lbs)
Operational Running Limit (min)2-3 duty cycle at 20° C
Nominal Current Draw 12V / 24V530A / 280A
Min. Battery CCA (DIN) 12V / 24V550 / 300
Min. Battery CCA (SAE) 12V / 24V1045 / 570
Min. Battery CCA (EN) 12V / 24V940 / 520
Recommended fuseANL 400 / ANL 250
Ideal Vessel ClassMotor boat, Sail boat
Ideal Vessel Size10-15m (35-48ft)
Bow CapabilityYes
Stern CapabilityYes
Retractable CapabilityNo
External Mounting CapabilityNo
Tunnel CapabilityYes
Weight20kg / 44lbs

Product Enquiry

Main Menu