Sleipner E150 eVision tunnel bow/stern thruster 24V/48V

The E150 is a highly efficient, compact, lightweight thruster suitable for boats between 14-20 meters (44-64 feet). The integrated inverter for variable speed control makes for a quick and easy installation.

E150 has the new 6-phase PMSM synchronous motor made explicitly for marine thruster use, delivering performance and runtime never seen before in a DC thruster.

• Up to 50% lighter
• Compact design
• Industry-leading runtime
• Active air cooling

S-LINK™

S-Link™ is a CAN-based control system used for communication between Sleipner products installed on a vessel.

• Compact and waterproof plugs
• Keyed and color-coded connectors to ensure correct and easy installation
• Different cable lengths, extenders and T-connectors makes the system scalable and flexible to install

Q-PROP™

The Q-PROP™ has measured noise reductions of up to 75% in controlled environments. The five-bladed skew propeller reduces noise levels while maintaining exceptional efficiency. Some thruster models even see an increase in thrust power.

• The expected noise reduction in average installations: 20-40%
• Upgrade kits are available for most Sleipner thruster models with special adaptors

PRO™

A PRO™ thruster system enables you to apply only the necessary power to complete your maneuver. The variable speed control eliminates the noise associated with standard on/off thrusters.

The system also includes a practical hold-function. In a dual system (bow and stern) a single press of a button will keep you alongside the docks - making docking truly a one-person job.

Speed controlled thrusters are the best choice for joystick interaction.​

IGNITION PROTECTION

Our ignition-protected products are compliant with ISO 8846 and ensure gasoline or other flammable fumes cannot enter or be ignited.

OVERHEAT PROTECTION

When an unsafe temperature is detected, On/off thrusters are automatically shut off to prevent overheating. PRO™ thrusters with speed control provide extended run-time by derating the thrust power to maintain temperature within safe levels.

FLEXIBLE INSTALLATION

Sleipner offers installation flexibility to work with the space you have. Our thruster models allow installation at any angle on the tunnel, tailored to fit any space available in your vessel.

Power Supply

Powered by direct current.

GALVANIC SEPARATION

Immersed parts exposed to seawater are galvanic isolated from the onboard electrical system, eliminating stray currents.

SEALED DRIVE LUBRICATION

The thruster gearleg is pre-filled for lifetime lubrication and sealed using a long-time mechanical seal with ceramic and carbon surfaces for ultimate security against water intrusion.

FLEXIBLE COUPLING

Flexible coupling protects the product’s driveline by compensating for misalignment between the shafts of the electric motor and gearleg.

TWIN PROPELLERS

Twin propellers can provide more thrust than a single propeller system in the same tunnel diameter. We use this system in our mid-range models, where high thrust is required in small tunnel diameters. Due to the compact design and high performance, the twin models have become the thrusters of choice among boatbuilders worldwide. Manufacturer product page

Dimensions

• (H) Height: 387mm / 15.2in
• (L) Length: 285mm / 11.2in
• (W) Width: 258mm / 10.2in
• (ID) Internal Diameter: 215mm / 8.46in
• (WD) Water Depth: 215mm / 8.46in
• (TL) Recommended Tunnel Length: 280mm / 11in
• (TL min.) Minimum Tunnel Length: 235mm / 9.3in
• (T min.) Minimum Tunnel Wall Thickness: 6mm / 0.24in
• (T max.) Maximum Tunnel Wall Thickness: 8mm / 0.32in

Stern dimensions

• H: 285mm / 11.2in
• (L) Internal Length: 354,5mm / 13.9in
• (+L) Tunnel Length: 300mm / 11.8in
• W: 330mm / 13in
• (D) Diameter: 258mm / 10.2in
• (WD) Stern Water Depth: 215mm / 8.5in
• (HT) Maximum Hull Thickness: 57mm / 2.2in