Sleipner SXP100/185T PRO™ External stern thruster 12V/24V

The SX100 PRO is an efficient stern thruster for boats with twin stern drives. With its 100 kg of thrust and ignition protection, it is safe to install in petrol-powered boats. With variable speed control, all you need to worry about when docking is getting the ropes ready.

SX100 utilizes special cowls to enable good performance by diverting the water flow past the stern drive legs. The unit is delivered preassembled, wired, and sealed in a waterproof box and only requires a small hole into the boat's transom to attach the power and control cables.

S-LINK™

S-Link™ is a CAN-based control system used for communication between Sleipner products installed on a vessel

• Compact and waterproof plugs
• Keyed and color-coded connectors to ensure correct and easy installation
• Different cable lengths, extenders and T-connectors makes the system scalable and flexible to install

Q-PROP™

The Q-PROP™ has measured noise reductions of up to 75% in controlled environments. The five-bladed skew propeller reduces noise levels while maintaining exceptional efficiency. Some thruster models even see an increase in thrust power.

• The expected noise reduction in average installations: 20-40%
• Upgrade kits are available for most Sleipner thruster models with special adaptors

PRO™

A PRO™ thruster system enables you to apply only the necessary power to complete your maneuver. The variable speed control eliminates the noise associated with standard on/off thrusters.

The system also includes a practical hold-function. In a dual system (bow and stern) a single press of a button will keep you alongside the docks - making docking truly a one-person job.

Speed controlled thrusters are the best choice for joystick interaction.​

INTELLIGENT POWER CONTROL

Sleipner's patented intelligent power control provides a minimal delay between drive directions to reduce wear of the mechanical parts while monitoring solenoid functions. In the case of a solenoid lock-in, the thruster will automatically stop without extra user action or controlling the main switch.

IGNITION PROTECTION

Our ignition-protected products are compliant with ISO 8846 and ensure gasoline or other flammable fumes cannot enter or be ignited.

WATERPROOF HOUSING

Waterproof housing for use in areas exposed to water.

OVERHEAT PROTECTION

When an unsafe temperature is detected, On/off thrusters are automatically shut off to prevent overheating. PRO™ thrusters with speed control provide extended run-time by derating the thrust power to maintain temperature within safe levels.

POWER SUPPLY

Powered by direct current.

GALVANIC SEPARATION

Immersed parts exposed to seawater are galvanic isolated from the onboard electrical system, eliminating stray currents.

SEALED DRIVE LUBRICATION

The thruster gearleg is pre-filled for lifetime lubrication and sealed using a long-time mechanical seal with ceramic and carbon surfaces for ultimate security against water intrusion.

TWIN PROPELLERS

Twin propellers can provide more thrust than a single propeller system in the same tunnel diameter. We use this system in our mid-range models, where high thrust is required in small tunnel diameters. Due to the compact design and high performance, the twin models have become the thrusters of choice among boatbuilders worldwide.

Dimensions:

• (H) Height: 692mm / 27.26in
• (L) Length: 314mm / 12.38in
• (W) Width: 361mm / 14.23in
• (a): 115mm / 4.54in
• (b): 91mm / 3.60in
• (c): 140mm / 5.53in