Sleipner SPS92B Actuator kit for Vector Fins™ VF1350

90mm shaft, for VF1350 stabilizer fins. The height inside a boat is often a critical measurement when installing stabilizing systems in modern boats.

Sleipner's SPS92 actuators for Vector fins™ are up to 75 percent more compact than others, constructed for easy installation and minimal noise reproduction.

Silent and Reliable Construction

Technical design benefits

• Precision machining and assembly secures a long lifetime and durability.
• No additional center lock. This is automatic in the standard hydraulic system – very safe due to the hydraulics having extreme safety limits – actually stronger than the shaft.
• Dual cylinders provide a balanced load, unlike single-cylinder solutions and less bearing load, allowing for a more compact shaft bearing assembly.
• Purpose-designed dual shaft sealing - superior to standard Simmer Ring lip seals.
• Internal hydraulic connections on actuators are pre-fitted. The installer only fits non-moving hoses/pipes - Easier and safer.
• No complex adjustments are required to set up a controller with lots of factors. These are set automatically on the first sea-trial of the boat.
• Bearing the lifetime lubricated SKF high-load bearings transferring the cylinder forces to the fins, have a built-in tightening system. This means that when you on most brands often need to change all bearings to remove a small noise from minimal bearing wear, you can instead tighten them again and keep going—saving both cost and hassle to get the bearings changed.
• Vector fins are easily and quickly installed and removed from the outside for best convenience, such as transport or other haul-out situations.
• Defined shaft-shear point in cDefined shaft-shear point in case of the fins accidentally hitting something.
• All wet parts are made of stainless steel.

Size comparison

Size from side view compared to other brand actuators for similar fin size:

Properties

360° INSTALLATION

Designed to fit in small and challenging installation areas, the Vector Fins™ unique cone shaft design allows you to utilize the space onboard to install the actuators in any direction and insert the fins into the position you require.

S-LINK™

S-Link™ is a CAN-based control system used for communication between Sleipner products installed on a vessel.

• Compact and waterproof plugs
• Keyed and color-coded connectors to ensure correct and easy installation
• Different cable lengths, extenders and T-connectors makes the system scalable and flexible to install

HYD

Powered by hydraulic pressure.

Dimensions:

• (H) Height: 260mm / 10.2in
• (+H) Additional Height: 347mm / 13.7in
• (L) Length: 871mm / 34.3in
• (W) Width: 700mm / 27.6in
• (D) Diameter: 235mm / 9.3in
• (HT) Hull Thickness: 86mm / 3.4in