Sleipner SEP50 PRO IP Tunnel bow/stern Thruster 12/24V (SEP50/140S-IP)

The SEP50 IP PRO with ignition protection is suitable for boats between 27-37 feet. With its 50-62 kgs of thrust and variable speed control, all you need to worry about when docking is getting the ropes ready.

Ignition protection is ideal for boats with gasoline engines.

Also available in standard on/off version. Remote control is a popular accessory. See some of the significant product features below.

FLEXIBLE INSTALLATION

Sleipner offers installation flexibility to work with the space you have. Our thruster models allow installation at any angle on the tunnel, tailored to fit any space available in your vessel.

POWER SUPPLY

Powered by direct current.

SPLASH-PROOF

This product is manufactured for installations in environments that may experience moist or occasional splashes.

OVERHEAT PROTECTION

Automatic detection of overheating of internal components. When an unsafe temperature is detected, the unit is automatically shut off to prevent overheating.

S-LINK™

S-Link™ is a CAN-based control system used for communication between Sleipner products installed on a vessel.

• Compact and waterproof plugs
• Keyed and color-coded connectors to ensure correct and easy installation
• Different cable lengths, extenders and T-connectors makes the system scalable and flexible to install

PRO™

A PRO™ thruster system enables you to apply only the necessary power to complete your maneuver. The variable speed control eliminates the noise associated with standard on/off thrusters.

With a dual setup (bow and stern), you also get a practical hold function enabling you to set and leave the level of thrust.

IGNITION PROTECTION

Our ignition-protected products are compliant with ISO 8846 and ensure gasoline or other flammable fumes cannot enter or be ignited.

GALVANIC SEPARATION

Immersed parts exposed to seawater are galvanic isolated from the onboard electrical system, eliminating stray currents.

SEALED DRIVE LUBRICATION

The thruster gearleg is pre-filled for lifetime lubrication and sealed using a long-time mechanical seal with ceramic and carbon surfaces for ultimate security against water intrusion.

SINGLE PROPELLER

A properly engineered single propeller system will be the most energy efficient thruster. Its compact design fits easily into narrow bows making it the perfect match for our smaller thruster range. With more than 60.000 single propeller thrusters in use, the single propeller has proven its reliability.

Q-PROP™

The Q-PROP™ has measured noise reductions of up to 75% in controlled environments. The five-bladed skew propeller reduces noise levels while maintaining exceptional efficiency. Some thruster models even see an increase in thrust power.

• The expected noise reduction in average installations: 20-40%
• Upgrade kits are available for most Sleipner thruster models with special adaptors

INTELLIGENT POWER CONTROL

Sleipner's patented intelligent power control provides a minimal delay between drive directions to reduce wear of the mechanical parts while monitoring solenoid functions. In the case of a solenoid lock-in, the thruster will automatically stop without extra user action or controlling the main switch.

Dimensions

• (H) Height: 323mm / 12.72in
• (L) Length: 272mm / 10.71in
• (W) Width: 232mm / 9.13in
• (ID) Internal Diameter: 140mm / 5.51in
• (WD) Water Depth: 140mm / 5.51in
• (TL) Recommended Tunnel Length: 152mm / 5.98in
• (TL min.) Minimum Tunnel Length: 124mm / 4.88in
• (T min.) Minimum Tunnel Wall Thickness: 5mm / 0.2in
• (T max.) Maximum Tunnel Wall Thickness: 7mm / 0.28in