Sleipner SE80 Tunnel Thruster 12/24V (SE80/185T)

The SE80 provides 80-96 kg of thrust suitable for a wide range of boats between 10-15m. Utilizing the same mechanical parts as the even more powerful SE100 makes it an exceptional energy-efficient thruster, and thereby a very popular model.

It is fitted either in a tunnel through the boat's bow or into a stern tunnel at the boat's stern using a stern thruster kit (sold separately). Remote control is a popular accessory. See some of the significant product and safety features below.

FLEXIBLE INSTALLATION

Sleipner offers installation flexibility to work with the space you have. Our thruster models allow installation at any angle on the tunnel, tailored to fit any space available in your vessel.

POWER SUPPLY

Powered by direct current.

FLEXIBLE COUPLING

Flexible coupling protects the product’s driveline by compensating for misalignment between the shafts of the electric motor and gearleg.

ANALOG

Sleipner analog signal cables with Plug & Play connectors are color-coded to match the wiring diagrams with high-quality connectors to ensure a correct installation.

OVERHEAT PROTECTION

Automatic detection of overheating of internal components. When an unsafe temperature is detected, the unit is automatically shut off to prevent overheating.

GALVANIC SEPARATION

Immersed parts exposed to seawater are galvanic isolated from the onboard electrical system, eliminating stray currents.

SEALED DRIVE LUBRICATION

The thruster gearleg is pre-filled for lifetime lubrication and sealed using a long-time mechanical seal with ceramic and carbon surfaces for ultimate security against water intrusion.

TWIN PROPELLERS

Twin propellers can provide more thrust than a single propeller system in the same tunnel diameter. We use this system in our mid-range models, where high thrust is required in small tunnel diameters. Due to the compact design and high performance, the twin models have become the thrusters of choice among boatbuilders worldwide.

Q-PROP™

The Q-PROP™ has measured noise reductions of up to 75% in controlled environments. The five-bladed skew propeller reduces noise levels while maintaining exceptional efficiency. Some thruster models even see an increase in thrust power.

• The expected noise reduction in average installations: 20-40%
• Upgrade kits are available for most Sleipner thruster models with special adaptors

INTELLIGENT POWER CONTROL

Sleipner's patented intelligent power control provides a minimal delay between drive directions to reduce wear of the mechanical parts while monitoring solenoid functions. In the case of a solenoid lock-in, the thruster will automatically stop without extra user action or controlling the main switch.

Dimensions

• (H) Height: 352mm / 13.86in
• (L) Length: 206mm / 8.11in
• (W) Width: 252mm / 9.92in
• (ID) Internal Diameter: 185mm / 7.28in
• (WD) Water Depth: 185mm / 7.28in
• (TL) Recommended Tunnel Length: 216mm / 8.5in
• (TL min.) Minimum Tunnel Length: 179mm / 7.05in
• (T min.) Minimum Tunnel Wall Thickness: 6mm / 0.24in
• (T max.) Maximum Tunnel Wall Thickness: 8mm / 0.31in

Stern dimensions

• (L) Internal Length: 294mm / 11.6in
• (+L) Tunnel Length: 265mm / 10.4in
• ID: 185mm / 7.3in
• (HT) Maximum Hull Thickness: 56mm / 2.2in