Sleipner SRV80/185T Vertical Retractable bow/stern thruster 12/24V

The SRV80 is a sturdy retractable thruster suitable for cruiser-racers or flat-bottomed boats between 10-15m. With its quick deployment and 80-96 kgs of thrust, you get a thruster installation you can rely on year after year.

The SRV80 is also available in PRO with variable speed control.

POWER SUPPLY

Powered by direct current.

FLEXIBLE COUPLING

Flexible coupling protects the product’s driveline by compensating for misalignment between the shafts of the electric motor and gearleg.

ANALOG

Sleipner analog signal cables with Plug & Play connectors are color-coded to match the wiring diagrams with high-quality connectors to ensure a correct installation.

OVERHEAT PROTECTION

Automatic detection of overheating of internal components. When an unsafe temperature is detected, the unit is automatically shut off to prevent overheating.

GALVANIC SEPARATION

Immersed parts exposed to seawater are galvanic isolated from the onboard electrical system, eliminating stray currents.

SEALED DRIVE LUBRICATION

The thruster gearleg is pre-filled for lifetime lubrication and sealed using a long-time mechanical seal with ceramic and carbon surfaces for ultimate security against water intrusion.

TWIN PROPELLERS

Twin propellers can provide more thrust than a single propeller system in the same tunnel diameter. We use this system in our mid-range models, where high thrust is required in small tunnel diameters. Due to the compact design and high performance, the twin models have become the thrusters of choice among boatbuilders worldwide.

Q-PROP™

The Q-PROP™ has measured noise reductions of up to 75% in controlled environments. The five-bladed skew propeller reduces noise levels while maintaining exceptional efficiency. Some thruster models even see an increase in thrust power.

• The expected noise reduction in average installations: 20-40%
• Upgrade kits are available for most Sleipner thruster models with special adaptors

INTELLIGENT POWER CONTROL

Sleipner's patented intelligent power control provides a minimal delay between drive directions to reduce wear of the mechanical parts while monitoring solenoid functions. In the case of a solenoid lock-in, the thruster will automatically stop without extra user action or controlling the main switch.

Dimensions:

• (H) Height: 244mm / 9.61in
• (+H) Additional Height: 193mm / 7.60in
• (L) Length: 563mm / 22.17in
• (W) Width: 356mm / 14.02in
• (ID) Internal Diameter: 185mm / 7.28in
• (WD) Water Depth: 185mm / 7.28in
• (RD) Retract Depth: 275mm / 10.83in
• (RW) Retract Width: 195mm / 7.66in
• (MW) Mould Width: 262mm / 10.32in
• (MH) Mould Height: 62mm / 2.43in