Sleipner SRV80 Vertical Retractable bow/stern thruster 12/24V (SRV80/185T)
The SRV80 is a sturdy retractable thruster suitable for cruiser-racers or flat-bottomed boats between 10-15m. With its quick deployment and 80-96 kgs of thrust, you get a thruster installation you can rely on year after year.
5.747,00 € – 6.035,00 €Sleipner
The SRV80 is also available in PRO with variable speed control.
POWER SUPPLYPowered by direct current.
FLEXIBLE COUPLINGFlexible coupling protects the product’s driveline by compensating for misalignment between the shafts of the electric motor and gearleg.
ANALOGSleipner analog signal cables with Plug & Play connectors are color-coded to match the wiring diagrams with high-quality connectors to ensure a correct installation.
OVERHEAT PROTECTIONAutomatic detection of overheating of internal components. When an unsafe temperature is detected, the unit is automatically shut off to prevent overheating.
GALVANIC SEPARATIONImmersed parts exposed to seawater are galvanic isolated from the onboard electrical system, eliminating stray currents.
SEALED DRIVE LUBRICATIONThe thruster gearleg is pre-filled for lifetime lubrication and sealed using a long-time mechanical seal with ceramic and carbon surfaces for ultimate security against water intrusion.
TWIN PROPELLERSTwin propellers can provide more thrust than a single propeller system in the same tunnel diameter. We use this system in our mid-range models, where high thrust is required in small tunnel diameters. Due to the compact design and high performance, the twin models have become the thrusters of choice among boatbuilders worldwide.
Q-PROP™The Q-PROP™ has measured noise reductions of up to 75% in controlled environments. The five-bladed skew propeller reduces noise levels while maintaining exceptional efficiency. Some thruster models even see an increase in thrust power.
- The expected noise reduction in average installations: 20-40%
- Upgrade kits are available for most Sleipner thruster models with special adaptors
INTELLIGENT POWER CONTROLSleipner's patented intelligent power control provides a minimal delay between drive directions to reduce wear of the mechanical parts while monitoring solenoid functions. In the case of a solenoid lock-in, the thruster will automatically stop without extra user action or controlling the main switch.
- (H) Height: 244mm / 9.61in
- (+H) Additional Height: 193mm / 7.60in
- (L) Length: 563mm / 22.17in
- (W) Width: 356mm / 14.02in
- (ID) Internal Diameter: 185mm / 7.28in
- (WD) Water Depth: 185mm / 7.28in
- (RD) Retract Depth: 275mm / 10.83in
- (RW) Retract Width: 195mm / 7.66in
- (MW) Mould Width: 262mm / 10.32in
- (MH) Mould Height: 62mm / 2.43in
|Power Requirement||12V / 24V DC|
|Power Output||4.4kW / 6hp|
|Thrust at 12V / 24V||96kg (212lbs)|
|Thrust at 10.5V / 21V||80kg (176lbs)|
|Operational Running Limit (min)||2-3 duty cycle at 20° C|
|Nominal Current Draw 12V / 24V||530A / 280A|
|Min. Battery CCA (DIN) 12V / 24V||550 / 300|
|Min. Battery CCA (SAE) 12V / 24V||1045 / 570|
|Min. Battery CCA (EN) 12V / 24V||940 / 520|
|Recommended fuse 12V / 24V||ANL 400 / ANL 250|
|Ideal Vessel Class||Motor boat, Sail boat|
|Ideal Vessel Size||10-15m (35-48ft)|
|External Mounting Capability||No|